{"product_id":"rolex-oyster-royalite-observatory-dial-hand-wound-1941","title":"ROLEX Oyster Royalite \"Observatory Dial\" 1941","description":"\u003cp\u003e\u003cstrong\u003eTimegrapher +60s\/d 235° 0.5ms\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIn 1931 Rolex patented the self-winding mechanism that would define the modern wristwatch. The difficulty it had to overcome was one of direction: a rotor turns both ways, while a winding train accepts only one. Rolex answered with a reversing wheel that rectified rotation in either direction into a single winding motion, and to keep that wheel free of backlash each of its two overlapping wheels was built from a pair of components. The assembly was necessarily tall — no conventional case back would clear it — and so the domed back known as the Bubbleback was born.\u003c\/p\u003e\n\n\u003cp\u003eRemove the rotor and its reversing wheel, however, and what remains is the hand-wound movement of the day. The automatic calibers grew from precisely that base: the small-seconds 620 of 1931, then in 1936 the 23.3mm 10½-ligne small-seconds 520 and the centre-seconds 530, each resting on a manually wound 11½- or 10½-ligne architecture.\u003c\/p\u003e\n\n\u003cp\u003eRef. 2765 is the clearest surviving evidence of that relationship. The case is, to any eye, a Bubbleback. The movement inside is the hand-wound 10½-ligne caliber that also underpins the 530 — no rotor, no reversing wheel, a ratchet wheel in their place. That the reversing wheel can be seated on this movement without modification says plainly that the two share a single lineage.\u003c\/p\u003e\n\n\u003cp\u003eWhy, then, a middle case shaped for an automatic? Hand-winding was still what most owners knew, and the early one-directional rotor rewarded an active wrist and little else. The likeliest explanation is also the simplest: customers asked for it, and Rolex obliged by setting a manually wound movement into the case it already had. Nearly every surviving 2765 carries a serial above 100,000, placing the reference from 1940 onward; this example dates to 1941. In these years the serial was not yet engraved between the lugs but on the case back itself, so a change of back was all that a change of movement required — and the 2765's back seats perfectly in a 2940, a detail that makes the arrangement look less like coincidence than intent.\u003c\/p\u003e\n\n\u003cp\u003eThe case is stainless steel, 32mm excluding the crown and 39mm from lug to lug, with a coin-edge screw-down back that sits flat rather than domed. That single departure earned the reference a name of its own: Flat Back. The lugs are stepped and the Oyster crown is period-correct, and the case carries the marks of eight decades without having been polished away.\u003c\/p\u003e\n\n\u003cp\u003eThe dial is where the reference states its ambition. \"ROYALITE\" appears beneath the Rolex Oyster signature as the pet name reserved for the higher specification, and \"OBSERVATORY\" is printed across the lower half — a declaration that the movement answered to a standard drawn from observatory chronometer testing. A red 24-hour scale runs inside the Arabic chapter as an inner register, and it is this arrangement that collectors know as the Observatory dial. Time has drawn the surface into a mottled cream, with spotting and tonal drift across the entire field and the printing softened in places.\u003c\/p\u003e\n\n\u003cp\u003eAt its heart beats the manually wound 10½-ligne caliber fitted with the Super Balance: timing screws recessed into a stepped rim rather than protruding from it, so that the resistance generated by the balance's own rotation is reduced and the rate steadies. The daily ritual of winding reinforces the connection between the wearer and the mechanism within.\u003c\/p\u003e\n\n\u003cp\u003eCompleting the watch is a vintage steel mesh bracelet, not original to the watch but carefully matched to the case and to the period it comes from. It fits a wrist of up to 18.5cm, and the 17mm lug width leaves the option of a strap open.\u003c\/p\u003e\n\n\u003cp\u003eMechanically transitional, historically legible, and genuinely scarce, this Royalite Observatory is the one reference in which the hand-wound and automatic halves of Rolex in the 1930s can be read side by side.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e- wrist size in our picture is 17cm circumference -\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Vintage Rolex Watches","offers":[{"title":"Default Title","offer_id":54086169919795,"sku":"3022","price":750000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/1076\/0499\/files\/01-rolex-2765.jpg?v=1789551162","url":"https:\/\/principe-prive-epocadoro.com\/products\/rolex-oyster-royalite-observatory-dial-hand-wound-1941","provider":"PRINCIPE PRIVE - Epoca d'Oro","version":"1.0","type":"link"}